Toilet Pull And Clear
When a toilet is backing up and a plunger will not fix it, the bowl usually needs to come off. The posted labor for a toilet pull and clear is $200. That means pulling the toilet, running the snake through the line beneath it, clearing the blockage, and resetting the toilet with a new wax ring. The wax ring is a part, sold at cost, no markup. You can buy one yourself for a few dollars if you prefer.
This is provisional labor. If the blockage is deeper than the toilet arm and we need to go into the main line, the posted labor shifts to the main line clearing price. You will know that before it happens. We do not pull a toilet and then announce the price changed. The number is on the table before the work turns. You decide if it makes sense.
Toilet clogs are often caused by things that should not be flushed, wipes, toys, too much paper at once. Sometimes the issue is a hard obstruction that snaking will not push through. If the line is clear but the toilet still will not flush right, the problem might be in the trap or the vent. We will tell you what we find and what the posted labor is to fix it.
- Posted labor: $200 to pull, clear, and reset with a new wax ring
- Wax ring sold at cost, or you provide it
- If the clog is in the main line, price shifts to main line clearing
Main Line Clearing
When multiple fixtures are backing up or the whole house is draining slow, the problem is usually in the main line. The posted labor for main line clearing is $300. This is done through an existing cleanout. We run a heavy cable with a cutter head down the line to break up the clog and pull back roots, grease, or whatever is blocking the pipe. If there is no cleanout or the only access is through the roof, we will quote that before we start.
This is provisional labor. Main line clogs can be straightforward or they can be a sign of a bigger problem. If the cable punches through but the line does not hold, the next step is usually hydro jetting or a camera inspection. Both have posted labor prices. You will see the number before the work escalates. You are not stuck in a situation where the price keeps climbing without your say so.
A lot of companies charge a low trip fee to get out and then hit you with a main line price that is all over the map. Our price is posted. $300 labor for main line clearing through an existing cleanout. The drive is a dollar a mile both ways. Parts, if any, at cost. You can do the math sitting at your kitchen table before you even pick up the phone.
- Posted labor: $300 through an existing cleanout
- Roof access or digging quoted separately before work begins
- If the line will not hold, jetting or camera work has a posted price
Hydro Jetting
When snaking punches a hole through the clog but the line closes back up, the pipe walls are likely coated with grease, sludge, or a root mass that a cable cannot fully clear. Hydro jetting uses high pressure water to scour the inside of the pipe back to bare walls. The posted labor for hydro jetting is $550. This is provisional, subject to what the job turns out to be, but it is the number you see before the work is offered.
Jetting is not always the first step. It is the step when snaking will not hold. We will tell you that plainly. You do not have to wonder if you are being upsold on something you do not need. The posted labor is $550. If the line is grease packed or root filled, jetting is what it takes to get the water moving again. The price is on the board before the hose goes in.
Hydro jetting is also a good maintenance move for lines that clog repeatedly. If you are snaking the same line every year, a jetting can clean it out well enough to buy you years between calls. The posted labor is the same, $550, whether it is an emergency or a planned job. Water is the only thing going down the pipe, no chemicals, no digging.
- Posted labor: $550 for hydro jetting
- Used when snaking will not hold, grease and root packed lines
- Scours pipe walls, no chemicals
Sewer Camera Inspection
If a line keeps clogging and nobody can tell you why, a camera inspection is how you find out. The posted labor for a sewer camera inspection is $250. We run a camera down the line and you get the footage. You are not taking our word for it. You can see the break, the belly, the root ball, or the collapsed section with your own eyes. The footage is yours to keep.
This is provisional labor. If the camera cannot pass because the line is full of water or debris, we may need to clear it first. That would be a separate posted labor charge. But if the line is accessible and the camera can run, the labor is $250. You get a clear look at what is going on underground without digging a hole just to guess.
A camera inspection is also smart before you buy a house. Knowing what the sewer line looks like can save you thousands down the road. The posted labor is the same. $250 to run the camera and give you the footage. No markup on anything. The drive is a dollar a mile both ways. You can book it, see the price, and pay the drive fee as a deposit to hold the slot.
- Posted labor: $250 for sewer camera inspection
- You get the footage, not just our word
- Useful for repeat clogs or before buying a home
Cleanout Install
If your house does not have a cleanout, or the only access is through the roof, every drain job costs more and takes longer. A cleanout install puts an accessible access point in the ground so the next clog is a straightforward job. The posted labor for a cleanout install is $650. This is provisional, subject to what the dig turns out to be, but it is the number on the board before the shovel hits the dirt.
The logic is simple. Pay once for the cleanout and every future clog is a fraction of the cost. Instead of pulling a toilet or going through the roof, the cable goes right into the cleanout. The main line clearing labor drops to $300. Over two or three clogs, the cleanout pays for itself. It is the kind of thing a plumber would tell a friend to do.
We will locate the line, dig down, cut in a cleanout, and backfill the hole. The parts are sold at cost. You can buy the cleanout fitting yourself if you want. The labor is $650. The drive is a dollar a mile both ways. You can add it to the cart on the homepage, see the total with the drive, and pay the drive fee as a deposit to reserve the day.
- Posted labor: $650 for cleanout install
- Makes future clogs a straightforward main line clearing
- Parts at cost, or you supply them