Simple Jack PlumbingKilleen · Prices Posted Price Board Drive Cost Water Filters Pay Invoice (254) 561-9163

Killeen, Texas · Belton

A Plumber in Belton With a Price Board

You should know what a plumbing job costs before you say yes. Simple Jack Plumbing posts labor prices right on the screen. No guessing, no hidden trip fees. The drive from the shop in Killeen to Belton is about 20 miles, counted both ways for a round trip of 40 miles. At a dollar a mile, the drive line on your invoice comes to $40. That is the whole charge for showing up. You pick the job from the board, you see the labor, you see the drive, and parts are at cost.

Call (254) 561-9163 Price your job
The Drive
$1
per mile, both ways
Round trip, out and back. No trip charge, no fuel surcharge, no minimum.
  1. Find your jobIt is on the board with a real number next to it.
  2. Add your milesA dollar a mile, out and back. The gauge does it for you.
  3. Parts at costBuy them yourself or pay what our receipt says.
  4. That is the priceAnything extra gets your yes before it happens.

The Real Cost of a Plumber in Belton

Most plumbing shops will not tell you the price over the phone. They want to get a truck in your driveway first. Then you get a number that feels pulled out of the air, loaded with a trip fee, a fuel surcharge, and a parts markup that doubles what the thing actually costs at the supply house. You end up paying way more than the work is worth because the whole system is built to keep you in the dark. That is not how we do it.

Simple Jack Plumbing runs on a different idea. Every labor price is posted on the website. You look at the board, you pick what you need, and you know the labor before anyone knocks on your door. Parts are sold at cost, no markup, or you can buy the part yourself and we install it. The drive is a flat dollar a mile, counted both ways from the shop in Killeen. For Belton, that is 20 miles out and 20 miles back, a 40 mile round trip, so the drive line is $40. That is the only trip charge you will ever see.

This is not a gimmick. It is how a working plumber should operate. You are hiring a guy to do a job, not to fund a marketing department or a fleet of wrapped trucks. When you call, you get a straight answer. A toilet install is $200 labor plus the $40 drive. A shower valve replacement is $300 labor plus the $40 drive. You can do the math at your kitchen table before you even pick up the phone. That is the way it ought to be.

Belton Homes and Hard Water Reality

Belton sits right in the middle of Central Texas, just down the road from Killeen. The town has a solid mix of older homes built many years ago and newer subdivisions that went up in the last few years. What ties them all together is the water. Central Texas water is hard, full of minerals that chew through pipes, clog up shower valves, and build up scale inside water heaters until they pop and leak all over a garage floor. If you live in Belton, you have probably dealt with it.

Older homes here often sit on slab foundations, which means the plumbing is buried in the concrete. When a drain line breaks under the slab, you do not just call a plumber, you call someone who knows how to jackhammer through the floor, trench out the bad pipe, and put it all back together. Newer homes are not off the hook either. Cheap builder-grade water heaters and plastic shutoff valves fail early, and the hard water speeds up the clock on every fixture in the house.

We see the same calls over and over in Belton. A toilet that will not stop running and needs a full swap. A shower valve that seized up because the cartridge is full of calcium. A kitchen sink drain that backed up on a Sunday morning. A water heater that rusted out three years before it should have. These are not complicated mysteries. They are just facts of life in this part of Texas, and they have posted prices on the board.

The Price Board

Every number here is labor.

Here are the posted labor prices for Belton, with the $40 round trip drive charge applied to each job.

Plumber in Belton, Texas

  • Toilet installSet, seal, supply line, test. Toilet at cost or bring your own. $200+ drive
  • Shower valve replacementCartridge or full valve. Opening tile is quoted separately. $300+ drive
  • Water filter installWhole-house or under-sink. Filter at cost, or install one you already bought. $400+ drive
  • Touch-up paint & minor drywall fixIncludes the supply run. We close the wall back up instead of leaving you a hole. $150+ drive
  • Main line clearingThrough an existing cleanout. Roof access or digging quoted first. $300+ drive
  • Water heater install (tank)Swap-out labor. Heater, pan, and expansion tank at cost. $450+ drive
  • Sink, tub, or laundry drain clearingStandard snaking through accessible access. $150+ drive
  • Jackhammer & trench a new line to the streetFull replacement run from the house to the city connection, concrete broken and restored. $5,000+ drive

What the drive actually costs you

Belton sits about 20 miles from the shop in Killeen. That is 40 miles there and back, so the drive line on your invoice is $40. It is charged both ways and it replaces the trip charge other shops bury in the bill. A toilet install in Belton reads as $200 posted labor plus $40 for the drive, with the toilet itself at cost.

Belton about 20 miles outRound trip 40 milesDrive $40$1 a mile, both ways

Put your address or ZIP into the gauge on the price board and it returns your miles and your drive cost before anybody picks up a phone. Add the jobs you want to your list, then reserve the visit by paying the drive as a deposit. That deposit comes off the final bill. Mileage is an estimate of the drive to you and is confirmed when you book. Parts are not included in the drive number.

Toilet Install and Shower Valve Work

A toilet swap in Belton is $200 labor plus the $40 round trip drive. That covers pulling the old toilet, setting the new one on a fresh wax ring, bolting it down, hooking up the supply line, and testing it until it flushes right and does not leak a drop. You can buy the toilet yourself at any supply store and have it sitting in the garage when we show up, or we can pick one up for you at cost. Either way, the labor is the same posted number, no surprises.

Shower valve replacement runs $300 labor plus the $40 drive. This covers a cartridge swap or a full valve body replacement, whatever the job calls for. If the valve is behind tile and we need to open the wall, that cutting and patching is quoted separately before any work starts. We do not hide a tile repair charge in the labor line. You will know the full picture before a tool touches your wall. A seized shower valve is one of the most common calls in Belton, and it should not come with a mystery price tag.

One thing we do that most plumbers will not is close the wall back up. If we have to cut into drywall to reach a valve or a leak, we offer a touch-up paint and minor drywall fix for $150 labor plus the drive. That includes the supply run for the patch materials. We do not leave you staring at a hole in the sheetrock waiting for a handyman to call you back. We finish the job, patch the wall, and leave the bathroom looking like we were never there.

  • Toilet install: $200 labor plus $40 drive, set seal supply test
  • Shower valve replacement: $300 labor plus $40 drive, cartridge or full valve
  • Touch-up paint and drywall fix: $150 labor plus $40 drive, we close the wall

Water Heaters and Water Filters in Belton

A tank water heater swap in Belton is $450 labor plus the $40 round trip drive. That is the labor to disconnect the old heater, haul it out, set the new one in place, hook up the water lines and the flue, and fire it up to make sure it heats. The heater itself, the drip pan, and the expansion tank are all sold at cost. You see the supply house receipt, you pay what we paid, not a penny more. You can also source the heater yourself if you prefer. The labor stays $450 either way.

Hard water is brutal on water heaters in Central Texas. The mineral buildup settles at the bottom of the tank and cooks under the burner until the steel weakens and rusts through. A lot of Belton homeowners do not know their heater is failing until there is water spreading across the floor. If you are replacing an old heater before it blows, you are already ahead of the game. We can have the new one in and running the same day, with a price you knew before we drove out.

Whole-house and under-sink water filters are another big one for Belton. A whole-house filter catches sediment and treats the water before it ever hits your pipes. Under-sink systems give you clean drinking water right at the tap. The labor to install a water filter is $400 plus the $40 drive. The filter unit is at cost, or you can install one you already bought and have sitting in the box. We do not care where the parts came from. We care that the job is done right and the price was honest from the start.

  • Water heater install tank: $450 labor plus $40 drive, heater at cost
  • Water filter install: $400 labor plus $40 drive, whole-house or under-sink
  • Parts always at cost, no markup, or bring your own

Drain Clearing and Main Line Work

A clogged sink, tub, or laundry drain in Belton is $150 labor plus the $40 drive. That is standard snaking through an accessible cleanout or trap. If the clog is deeper or the access is tough, we will tell you what the job looks like before we start running the cable. The posted $150 is the labor for a straightforward clear. If the drain needs more than that, you will know the number and why before you owe a dime.

Main line clearing is $300 labor plus the $40 drive. This is through an existing cleanout. If the cleanout is on the roof or buried and needs to be dug up, that access work is quoted first. A backed-up main line is a bad day for any homeowner. Sewage comes up where it should not, and you need it fixed fast. We do not charge extra for showing up on short notice. The drive is still $40 round trip, and the labor is still the posted $300. The urgency of your problem does not change the price.

Sometimes a main line is not just clogged, it is broken. Tree roots, shifting soil, or just old cast iron that finally gave out. When that happens, the fix is not a snake, it is a trench. We do full replacement runs from the house to the city connection. Jackhammer and trench a new line to the street is $5000 labor plus the $40 drive. That labor covers breaking the concrete, digging the trench, laying the new pipe, backfilling, and restoring the concrete. It is a big job, and the price is posted right on the board where anyone can see it.

  • Sink tub laundry drain: $150 labor plus $40 drive, standard snaking
  • Main line clearing: $300 labor plus $40 drive, through existing cleanout
  • Jackhammer and trench new line: $5000 labor plus $40 drive, concrete restored

How the Drive Charge Works for Belton

The drive charge is the most honest part of the whole setup. Most plumbing companies bury a trip fee in the labor or tack on a flat service call charge that has nothing to do with how far they actually drove. You pay the same whether they came from two miles away or twenty. That is not fair. Simple Jack Plumbing charges a dollar a mile, counted both ways from the shop in Killeen. Belton is about 20 miles out, so the round trip is 40 miles. The drive line on your invoice is $40, period.

You can see the drive number before you ever call. On the homepage there is a drive gauge. Type in your Belton address or ZIP, and it tells you the miles and the drive dollars right then. No phone call, no estimate, no waiting. You add the jobs you need from the price board into the cart, and the running total updates with the labor and the drive. When you are ready, you pay the drive fee as a deposit to reserve the visit, and that deposit comes off the final bill. You are never out extra money, you just put down the drive up front.

This system means a plumber in Belton costs exactly what the board says. A toilet install is $200 labor and $40 drive, total $240 in labor and trip. A shower valve is $300 labor and $40 drive, total $340. A water filter install is $400 labor and $40 drive, total $440. You can mix jobs on one visit and the drive is only charged once. The $40 covers the whole trip, no matter how many jobs you put in the cart. That is how you run a service business without hiding the cost.

Call a Plumber Who Posts the Price

Most people in Belton have never seen a plumbing price before the work is done. They get a bill at the end and hope it is not too bad. That is a lousy way to run a trade. Simple Jack Plumbing puts every labor price on the board, sells parts at cost, and charges a dollar a mile both ways for the drive. For Belton, that drive is $40 round trip from the shop in Killeen. You can look at the numbers right now and decide if it works for you.

There is no sales pitch when you call. You tell us what you need, we confirm the posted labor, we talk about the parts, and we set a time to show up. The phone number is (254) 561-9163. You are talking to the plumber who does the work, not a dispatcher reading a script. If the job turns out to be different than expected, you will know the new number before any extra work begins. No surprises, no hidden fees, no markup on parts. Just a plumber in Belton with a price board and a truck.

The drive is $40 round trip. The labor is posted. The parts are at cost. That is the whole deal. Call (254) 561-9163 and book a plumber who tells you the price up front.

Straight Answers

Common questions

How much does a plumber cost in Belton Texas?

A plumber in Belton costs the posted labor on the board plus the $40 round trip drive from Killeen. For example, a toilet install is $200 labor and $40 drive, total $240. A shower valve replacement is $300 labor and $40 drive, total $340. A water heater swap is $450 labor and $40 drive, total $490. Parts are sold at cost with no markup, or you can buy the part yourself. The drive is a dollar a mile counted both ways, and Belton is about 20 miles from the shop, making a 40 mile round trip. You see the full price before you book.

What is the trip charge for a plumber in Belton?

The trip charge for Belton is $40. That is the round trip drive fee at a dollar a mile both ways from the shop in Killeen. Belton is about 20 miles out, so the round trip is 40 miles. There is no hidden service call fee, no fuel surcharge, no extra charge for showing up. The $40 drive line is the only trip charge on your invoice. You can type your Belton address into the drive gauge on the homepage and see the exact miles and drive dollars before you call. The drive fee is paid as a deposit to reserve the visit and comes off the final bill.

Do you mark up parts on plumbing jobs?

No. Parts are sold at cost with zero markup. You see the supply house receipt and pay exactly what we paid. If you prefer to buy the part yourself, you can do that too. Have the toilet, water heater, or filter sitting in the garage and we will install it for the posted labor plus the drive. Most plumbing companies double or triple the part cost and pocket the difference. We do not. The labor price is what you pay for the work, and the part is what the part costs. That is the whole arrangement.

Can I book multiple plumbing jobs on one visit to Belton?

Yes. You can add multiple jobs from the price board into the cart on the website. The running total updates with all the labor and the drive. The $40 round trip drive charge is only applied once per visit, no matter how many jobs you put in the cart. So a toilet install and a sink drain clearing would be $200 labor plus $150 labor plus a single $40 drive, total $390 in labor and trip. You pay the drive fee as a deposit to reserve the visit, and that deposit comes off the final bill.

What areas around Belton do you cover?

Simple Jack Plumbing is based in Killeen and covers Belton and the surrounding Central Texas area. The drive charge is always a dollar a mile counted both ways from the shop. Belton is about 20 miles out, so the round trip is 40 miles and the drive line is $40. If you are a little further out, the drive gauge on the homepage will tell you the exact miles and drive dollars for your address. The labor prices stay the same posted board rates. The only thing that changes by location is the round trip drive number.

More Posted Prices

Other jobs on the board

Ready When You Are

Call it in or price it yourself.

Call or text (254) 561-9163 and say what is going on. Or build your list on the price board, pay the drive as a deposit to hold the visit, and it comes off the final bill.

Call (254) 561-9163 Get a quote