About water heater install in Auburn

Auburn is a south King County city with established neighborhoods, newer developments and a significant commercial and industrial base.

We serve Auburn from our Lakewood base - travel calculated at booking.

Many mid-century Auburn houses have a water heater that is 15 or more years old, near the end of its life. If yours is leaking at the base, it is time to replace rather than repair.

Washington expects water heaters to be seismically strapped, and rules on permits and venting vary by city and by setup. Ask when you call and we will cover what applies to your job when we confirm the price.

Auburn has a lot of single-family houses from the 1960s through the 1990s, and original water heaters from that era are showing their age.

What happens on the job

Confirm the tank size, fuel type, location and venting so the price is accurate
Drain, disconnect and remove the old tank
Install the tank you provide, make the connections and check for leaks
Test the heater and explain how it should be running

Flat rates for Auburn

Our flat rates. The price you see is the price, confirmed before any work starts. No service-call fee when we do the work.

Service	Our flat rate	Typical published price*
DIAGNOSIS
Diagnosis / service call (plumbing or electrical)Credited toward any job	$79
PLUMBING
Single drain clearing (accessible cleanout)	$189	$245–545
Toilet repair (fill valve / flapper / seal)	$179	$200–500
Toilet replacement (your unit, standard install)	$349
Faucet replacement (kitchen or bath, your fixture)	$229	$275–650
Garbage disposal replacement (your unit)	$249
Accessible pipe leak repair	from $225
Water heater install, 40–50 gal tank (your unit)Labor only, you supply the unit. Unit + haul-away quotable on request.	$500 labor	$2,100–5,800 installed
ELECTRICAL
Outlet or switch replacement	$129	$150–250
GFCI outlet install	$149
Light fixture replacement (your fixture)	$149	$150–350
Ceiling fan install (your fan, existing box)	$199	$250–400
Smart thermostat / video doorbell install	$129
Breaker replacement	$179
Whole-house rewire (labor)Labor only. Materials and permit are quoted separately after a walkthrough.	$4,000 labor	$8,000–30,000 all-in
Electrical troubleshootingThe $79 diagnosis, credited toward the fix	$79
HOME REPAIR
Make-ready / turn service (paint touch-up, deep clean, misc fixes)Larger homes quoted after a walkthrough	from $995
Anything elseNo overtime markup on weekdays	$90/hr	$110–230/hr

* Published Seattle-area and Washington cost guides, 2026. Ranges shown only where a published range exists. The water heater range includes the unit; our $500 is labor only. Prices are for typical, accessible conditions; anything unusual is quoted and confirmed before work starts.

Questions

Can you supply the heater too?

Yes. Unit and haul-away of the old tank can be quoted on request. The $500 price covers labor only.

Do I need a permit?

Rules vary by city and setup. Ask when you call and we will cover what applies at your address before the price is confirmed.

My water heater is leaking. What now?

Shut off the water supply to the tank if you can, then call or text us with a photo of the tank and the label.

Tell Doug what is wrong

Name, number and a line about the problem. You get the flat price before anyone knocks. Or call or text (253) 349-2907, or book now and see your exact price.

Water heater install nearby

All services in Auburn · Water heater install everywhere we work · Full pricing

Water heater install in Auburn