About electrical in Graham

Graham is a rural-suburban Pierce County community with larger lots, newer homes and some older rural properties.

Newer Graham homes usually have straightforward wiring and good panels, so most calls are fixtures, fans, smart devices and the occasional breaker.

For troubleshooting, the $79 diagnosis finds the cause and is credited toward the fix when we do the work. Bigger jobs that are not on the menu are $90 per hour, and defined jobs are often quoted flat first.

Larger lots in Graham often mean longer runs from the house, so tell us about the location and access when you call.

What happens on the job

Confirm what you need and give you the flat rate before we start
Replace or install the outlet, switch, fixture, fan, breaker or device you provide
Test the circuit and the device when we are done
Tell you plainly if something we find needs a bigger job, and quote it first

Flat rates for Graham

Our flat rates. The price you see is the price, confirmed before any work starts. No service-call fee when we do the work.

Service	Our flat rate	Typical published price*
DIAGNOSIS
Diagnosis / service call (plumbing or electrical)Credited toward any job	$79
PLUMBING
Single drain clearing (accessible cleanout)	$189	$245–545
Toilet repair (fill valve / flapper / seal)	$179	$200–500
Toilet replacement (your unit, standard install)	$349
Faucet replacement (kitchen or bath, your fixture)	$229	$275–650
Garbage disposal replacement (your unit)	$249
Accessible pipe leak repair	from $225
Water heater install, 40–50 gal tank (your unit)Labor only, you supply the unit. Unit + haul-away quotable on request.	$500 labor	$2,100–5,800 installed
ELECTRICAL
Outlet or switch replacement	$129	$150–250
GFCI outlet install	$149
Light fixture replacement (your fixture)	$149	$150–350
Ceiling fan install (your fan, existing box)	$199	$250–400
Smart thermostat / video doorbell install	$129
Breaker replacement	$179
Whole-house rewire (labor)Labor only. Materials and permit are quoted separately after a walkthrough.	$4,000 labor	$8,000–30,000 all-in
Electrical troubleshootingThe $79 diagnosis, credited toward the fix	$79
HOME REPAIR
Make-ready / turn service (paint touch-up, deep clean, misc fixes)Larger homes quoted after a walkthrough	from $995
Anything elseNo overtime markup on weekdays	$90/hr	$110–230/hr

* Published Seattle-area and Washington cost guides, 2026. Ranges shown only where a published range exists. The water heater range includes the unit; our $500 is labor only. Prices are for typical, accessible conditions; anything unusual is quoted and confirmed before work starts.

Questions

Do you do whole-house rewires?

Yes. $4,000 labor, with materials and the permit quoted separately after a walkthrough. Published guides put whole-home rewires at $8,000 to $30,000 all-in.

Do I need a permit?

Rules vary by city and by the job. Ask when you call and we will cover what applies at your address before the price is confirmed.

How much does an outlet or switch replacement cost?

$129 flat. Published cost guides for Washington show typical outlet or switch work at $150 to $250.

Tell Doug what is wrong

Name, number and a line about the problem. You get the flat price before anyone knocks. Or call or text (253) 349-2907, or book now and see your exact price.

Electrical nearby

All services in Graham · Electrical everywhere we work · Full pricing

Electrical in Graham